#CONNECT GUITAR TO FL STUDIO SOFTWARE#
#CONNECT GUITAR TO FL STUDIO WINDOWS#

#CONNECT GUITAR TO FL STUDIO WINDOWS#

Once you're certain that your computer is recognizing the PreSonus device, you can set playback and recording volumes via the following steps: Steps for Windows Setup Plug amp into USB interface and USB interface into computerДЄt this point you can use the outputs from the line out on the back of your amplifier to plug into the PreSonus Audiobox, per the following picture: Once we get the USB interface hooked up, we can put our headphones on and dial in our EQ.ДЄs you'd expect, the wiring thus far is simple: Amp EQ: Start with all three EQ knobs at 12 o'clock and reverb OFFД«asically just keep everything really simple.Amp: Master volume set to 'bedroom' level.Here are the guitar and amp settings I'd recommend for recording on your computer: Set it up as though you had no intention other than to play it straight through the amplifier.Дial in volume on your guitar, your amp and set your amp's EQ. Setup guitar and amp then set volume levels for eachД«efore you mess with any other technology, get your guitar figured out first. Setting it all Up: Step by StepДЄssuming you have an amp with some kind of line level output (even a headphone output would work) here are the steps to connect your guitar to your computer.

#CONNECT GUITAR TO FL STUDIO SOFTWARE#

Having something like the AudioBox as a buffer between your guitar and your computer is the best way to make sure your recording software and amp are getting along as well as possible. However, I don't prefer USB mics for instrument recording because they make it a lot more difficult to do any kind of mixing and instead force you to rely entirely on your amp for volume control. You can do this and I've actually put together a list of USB microphones that I'd recommend for recording.

Couldn't I just use a USB microphone and skip the interface?

If your amp doesn't have any outputs, you'll need to look into either a preamp or a microphone for your amplifier. Having two is a more ideal scenario (since most USB interfaces support a left and right signal) but not critical. This means that your amplifier needs to be equipped with at least one output. The most common arrangement will be the following order:ДЎ. If you have these tools in place, we can turn our attention to configuration and order of operation.

Connect guitar to fl studio